Gas or electricity problems in Japan: what to check
Smell gas, lost your gas after an earthquake, or lose power when several appliances run at once? This guide gives the safety steps for a gas smell first, then explains how to reset a gas meter and why the power cuts out.
In short
If you smell gas, stop using gas at once and open the windows wide. Do not use a lighter or any flame, and do not touch electrical switches. Call your gas emergency line immediately. Gas meters can shut off the gas by themselves, for example after an earthquake, and you can often reset them. If the power cuts out when several appliances run at once, ask your electricity company to change your contract amperage.
Winter: no gas?
A cold evening
No hot water. Is the gas off?
No smell. Gas meters can shut themselves off. Checking.
In short
Gas meters can shut off the gas by themselves, for example after an earthquake, and you can often reset them.
Appliances off, reset, then about 3 minutes without using gas.
ホッ (phew)
Swipe for the next panel
From “Gas or electricity problems in Japan: what to check”.
Wait. Is that gas I smell?
Light on? Heater off? What first?
ドキドキ (heart pounding)
In short
If you smell gas, stop using gas at once and open the windows wide.
No flame. No switches. Calling the gas emergency line.
Swipe for the next panel
From “Gas or electricity problems in Japan: what to check”.
What to do, by situation
You smell gas
- Stop using gas at once.
- Open the windows wide.
- Do not use a lighter or any flame.
- Do not touch electrical switches.
- Call your gas emergency line immediately. Example (TEPCO, Tokyo area): for a gas smell, TEPCO sends customers to the Tokyo Gas Network Emergency Hotline, 0570-002299, 24 hours a day, not to its own number, and points to a list of emergency numbers for other areas. With LP gas, contact your LP gas company.
The shaking from an earthquake has just stopped
- Example (Sendai City Gas Bureau): protect yourself first. When the shaking stops, turn off gas appliances.
- Example (Sendai City Gas Bureau): check carefully for the smell of gas. If you smell gas, follow "You smell gas" above.
No gas, and no smell of gas
- Example (Sendai City Gas Bureau): if there is no smell of gas and the red lamp on the gas meter is blinking, reset the meter as below. Meters differ.
- Turn off every gas appliance, then press the meter's reset button.
- Wait about 3 minutes without using gas.
- If the gas does not come back, call your gas company. If you smell gas, follow "You smell gas" above.
- Know the limits of the reset. It does not work when supply to the whole area has stopped or pipes are damaged. Follow your own gas company's instructions.
The power cuts out when several appliances run at once
- Ask your electricity company to change your contract amperage.
You are buying a gas appliance or a gas alarm
- Find out whether your home has city gas or LP gas before you buy.
Key facts
- Wait after reset
- About 3 minutes without using gas (source)
- Contract amperage (TEPCO)
- 10 to 60 amperes on its standard household plan (source)
The complete guide
What to check and prepare
- Using gas safely every day. A leaflet from the Ministry of Economy, Trade and Industry for city gas users gives four points. Ventilate whenever you use a gas appliance, by running the fan or opening a window. Without enough fresh air the appliance burns incompletely and can cause carbon monoxide poisoning. Do not leave a pan of hot oil unattended, and keep your body and clothes away from the flame. Replace old gas appliances early with ones that have safety devices. Connect appliances with a connector that matches the shape and size of the appliance and the gas tap. A wrong connection can cause a gas leak or fire. An older leaflet from the same ministry says most deaths from gas are caused by carbon monoxide in the exhaust of gas appliances. It tells you to check that an appliance's flue has not come loose or become blocked. It also says a gas alarm (ガス警報器, gasu keihōki) makes prevention more effective.
What to do when gas or electricity stops working
- If you smell gas. Follow "Smell of gas" under At a glance first.
- After an earthquake. Example (Sendai City Gas Bureau): protect yourself first. When the shaking stops, turn off gas appliances. Check carefully for the smell of gas. If you smell gas, follow "Smell of gas" under At a glance.
- If the gas has stopped. Example (Sendai City Gas Bureau): the meter cuts the gas when it senses an earthquake of about upper 5 or stronger on the Japanese scale while gas is in use. Its red lamp then blinks. The bureau gives these steps to reset the meter.
- Turn off every gas appliance.
- Check that the tap at the meter is open.
- Take the cap off the reset button, press the button in fully and let go when the lamp lights.
- Put the cap back and wait about 3 minutes without using gas.
- When the lamp stops blinking you can use gas again.
- If it keeps blinking, check again that every appliance is off and repeat.
- If it still does not reset, call your gas company.
- Know the limits of the reset. The reset does not work when supply to the whole area has stopped or pipes are damaged. Meters differ, so follow your own gas company's instructions.
- If the power cuts out. See "The power cuts out when several appliances run at once" under Common problems.
Gas or electricity problems in Japan: key facts
- Smell of gas. Stop using gas at once and open the windows wide. Do not use a lighter or any flame. Do not touch electrical switches. Call your gas emergency line immediately. With LP gas, contact your LP gas company. Example (Tokyo Gas Network area): TEPCO tells customers who smell gas to call the Tokyo Gas Network Emergency Hotline, 0570-002299 (Navi Dial), or 03-6735-8899 if you cannot use Navi Dial, 24 hours a day. Outside that area, call your own gas company's emergency number.
- The gas stops. In some situations, gas meters (マイコンメーター, maikon mētā) shut off the gas by themselves. See steps 2 to 4 below.
- The power cuts out. See "The power cuts out when several appliances run at once" under Common problems.
- Gas type. Homes are supplied with either city gas or LP gas (propane).
Costs, fees and timing
- Electricity contract size and your bill. For electricity, the Agency for Natural Resources and Energy gives the common pattern as three parts. They are a basic charge set by your contracted capacity, a charge for the amount used, and the renewable energy surcharge (再エネ賦課金, saiene fukakin). For choosing the size, see "The power cuts out when several appliances run at once" under Common problems.
- Gas meter reset. For the wait after a reset, see step 3.
Common problems and where to get help
- The power cuts out when several appliances run at once. In some regions your contract sets how much electricity you can use at one time, in amperes (契約アンペア, keiyaku anpea). Example (TEPCO Energy Partner, Tokyo area): on its standard household plan you choose a size from 10 to 60 amperes. TEPCO says that, when you choose, what matters is how many appliances you use at once. Its rule of thumb is that 100 watts is about 1 ampere at 100 volts. On a TEPCO ampere breaker in your distribution board, the color and number show your contract size. TEPCO adds that some homes have no ampere breaker. Ask your electricity company to change the size.
- An appliance made for another type of gas. Example (Sendai City Gas Bureau): using an appliance that does not match the type of gas is very dangerous. Check the type supplied to your home before you buy a gas appliance. The two gases also behave differently in a leak. Yamaguchi Prefecture explains that LP gas is heavier than air and city gas is lighter than air, which is why an LP gas alarm is fitted near the floor. Household gas has a smell added so you can notice a leak.
Official pages and tools
- How to reset a gas meter, Sendai City Gas Bureau ↗ (in Japanese)マイコンメーター復帰方法
- Gas safety in an earthquake, Sendai City Gas Bureau ↗ (in Japanese)地震のときは
- The city gas supplied and gas appliances, Sendai City Gas Bureau ↗ (in Japanese)供給する都市ガスとガス機器
- Starting your gas supply, Sendai City Gas Bureau ↗ (in Japanese)ガスのご使用開始について
- Using LP gas correctly, Yamaguchi Prefecture ↗ (in Japanese)LPガスの正しい使い方!
- Four points to know when you use city gas (PDF leaflet), METI ↗ (in Japanese)都市ガスを使うときに知っててほしい4つのポイント
- Precautions to prevent gas accidents (PDF leaflet), METI ↗ (in Japanese)ガス事故を防ぐための注意事項
- 生活・就労ガイドブック 第12章 日常生活におけるルール・習慣 (Japanese chapter PDF), Immigration Services Agency: Living and Working Guidebook, ch. 12: daily rules and customs (PDF), Immigration Services Agency ↗ (in Japanese)生活・就労ガイドブック 第12章 日常生活におけるルール・習慣 (index: Living and Working Guidebook (index), Immigration Services Agency ↗ (in Japanese)生活・就労ガイドブック)
- How electricity charges work, with sample plans, Agency for Natural Resources and Energy ↗ (in Japanese)料金の仕組みと料金メニュー例のご紹介
Other sources
Not official sources: pages of the companies and organizations named. The guide uses them only for labeled examples and for each provider’s own terms.
- Check your home's contract amperage, TEPCO Energy Partner ↗ (in Japanese)わが家のアンペアチェック
- Standard household plan (Meter-Rate Lighting B), TEPCO Energy Partner ↗ (in Japanese)従量電灯B
- TEPCO frequently asked questions (gas emergency numbers), TEPCO Energy Partner ↗ (English page)Frequently Asked Questions
Words you will see
| Japanese | Romaji | Meaning |
|---|---|---|
| マイコンメーター | maikon mētā | gas meter with automatic shut-off |
| 復帰ボタン | fukki botan | reset button (on the gas meter) |
| ガス警報器 | gasu keihōki | gas alarm |
| 都市ガス | toshi gasu | city (piped) gas |
| LPガス / プロパンガス | erupī gasu / puropan gasu | LP gas (propane) |
| ブレーカー | burēkā | circuit breaker |
| 契約アンペア / アンペアブレーカー | keiyaku anpea / anpea burēkā | contract amperage / ampere breaker |
| 基本料金 | kihon ryōkin | basic charge |
Frequently asked questions
What should I do if I smell gas?
Stop using gas at once and open the windows wide. Do not use a lighter or any flame. Do not touch electrical switches. Call your gas emergency line immediately. With LP gas, contact your LP gas company.
My gas stopped after an earthquake. What should I do?
Example (Sendai City Gas Bureau): first, check for the smell of gas. If there is none and the red lamp on the gas meter is blinking, turn off all gas appliances. Then press the meter's reset button and wait about 3 minutes without using gas. If the gas does not come back, call your gas company. If you smell gas, follow "Smell of gas" under At a glance. Your company's meter may differ.
What is the difference between city gas and LP gas?
They are different gases, and appliances are made for one or the other. LP gas (propane) is heavier than air and city gas is lighter than air. Check which one your home has before you buy a gas appliance or a gas alarm.
Why does the power cut out when I use several appliances at once?
In some regions your contract sets how much electricity you can use at one time, in amperes (契約アンペア, keiyaku anpea). Ask your electricity company to change the size.
Why does household gas smell?
Household gas has a smell added so you can notice a leak.
Next step
- Utilities in Japan: setting up electricity, gas and water →
If the power keeps cutting out, ask your electricity company to change your contract.
- Disasters in Japan: prepare for earthquakes and floods →
After an earthquake, protect yourself first, then deal with the gas.
Reviewed by the Editorial Team · · Based on 10 official sources
Content based on the official sources listed above. It is general information, not individual legal advice.
Optional. Nothing about you is recorded.
Still unsure? Ask about this guide
Answers from this guide and its sources onlyTell me when this guide changes.